MMO COATED PIGGY PACK FOR CATHODIC PROTECTION

Piggy pack anodes are used to protect the tank bottoms. It’s the easiest method of cathodic protection which may not need a weld at site and also easy to handle and install.

Piggy pack wire anodes connected with cable by the way of Crimping and sealing with mastic and heat shrink sleeve procedure. Tiaano have the in house facility to crimp the anodes in LIDA and CPCC connection.

The piggy pack anodes are inserted in the jacket with coke fill to sustain the conductivity of the anodes in the place where we install for cathodic protection.

GALVANISED STEEL CANISTER

Canister anodes are made from metallic alloys like steel with more negative electrochemical potential than the object to be protected. They are usually filled with coke fill to make a conductivity of burial anodes.Canister length and dia will be customized

Once at the jobsite and just prior to installation into the ground, it is suggested that small holes or slots be cut into the steel canister to allow any available groundwater into the canister. Care should be taken when cutting these hole or slots to avoid damage to the anode or anode cable.

Tiaano supplied Tubular anodes with steel canisters.