Impressed Current Cathodic Protection (ICCP) Anodes

MMO Coated / Platinized Titanium & Niobium Anodes

PLATINISED ROD

clock October 17, 2022 15:40 by author admin

 Platinized titanium and MMO coated titanium rod anodes are to be designed & manufactured by Ti Anode Fabricators Pvt Ltd, Chennai, India. Application:  Deep & conventional ground beds. Jetties in fresh, brackish and salt-water electrolytes. Water tanks. Lock Gates. Intake Screens. Marine application.

 Substrate: Solid Titanium and Niobium & Copper cored Ti. Catalyst for surface Coating: Platinum Mixed Metal Oxide

Platinized Titanium and Niobium probe / cantilever type anodes are also available for use in Internal ICCP of process vessels such as pipes, condenser water boxes and heat exchangers where the interior is difficult to access and its space limited. Such anodes are often mounted through the vessel shell, with the anode part of the probe extending into the vessel, and wire connections made to the probe on the exterior of the vessel.

 Tiaano offer Platinised Titanium and Niobium cantilever (probe) anodes for this application (medium seawater, fresh water and brackish water) Also Tiaano offer platinized Rods and Tubes suitable for cantilevers (probes).

The primary use of platinized titanium anodes is in the field of Cathodic Protection. The anodes are used in structures buried in soil and the steel exposed to marine environments such as oil and gas producing platforms, ships, oil well casings and jetties.

Platinized Titanium Anodes synergistically combine the favorable electrochemical features of platinum (Pt) with the corrosion resistance and other characteristics of titanium. They are anodes normally produced by the electrochemical deposition of a very thin layer of platinum metal onto a titanium substrate. These anodes operate as inert anodes with high durability and are preferred because they remain insoluble in common electrolytes.

 FOR ENQUIRES PLEASE DROP YOUR EMAIL AT dsa@tiaano.com/dsasupport@tiaano.com

 

PLATINISED_ROD



PLATINUM PLATED CANTILEVER FOR CATHODIC PROTECTION

clock August 25, 2022 12:05 by author admin

 Cathodic protection (CP) is a technique used to control the corrosion of a metal surface by passing positive connection in the anodes side and negative connection in the cathodes side.

Platinum is an excellent catalyst due to its high conductivity and low consumption rate. Platinum deposition made by electroplating method over a high corrosion resistance substratePlatinum is a least reactive metals that has remarkable resistance to corrosion, even at high temperatures.

Cathodic protection is a method for preventing corrosion on submerged and underground metallic structures. Cathodic protection is one of the most effective method for preventing corrosion on a metal surface.

Platinized cantilever anode is used for protecting pipeline internals, suction and condenser box internal for 30 years and more by applying DC current from rectifier. Cantilever anode is coated with platinum or MMO (mixed metal oxide).

The cathode will be protected and could be monitor by the reference electrodes.

Platinized titanium rods are usually used in cantilever anode. Normally titanium is well known for its high resistance to corrosion both water and chemical media but titanium is the poor electricity conductor. So we use platinum/ MMO plating/ Coating to increase the conductivity.

Application:

  • Heat exchangers
  • Pumps
  • Valves
  • Pipes
  • Marine application

For Enquiries please drop your email at dsa@tiaano.com|dsasupport@tiaano.com

platinum_plated_cantilever



PLATINISED ROD

clock August 1, 2022 15:57 by author admin

Platinized titanium and MMO coated titanium rod anodes are to be designed & manufactured by Ti Anode Fabricators Pvt Ltd, Chennai, India. Application:  Deep & conventional ground beds. Jetties in fresh and brackish.

Substrate: Solid Titanium and Niobium & Copper cored Ti. Catalyst for surface Coating: Platinum Mixed Metasalt-water electrolytes. Water tanks. Lock Gates. Intake Screens. Marine application Oxide

Platinized Titanium and Niobium probe / cantilever type anodes are also available for use in Internal ICCP of process vessels such as pipes, condenser water boxes and heat exchangers where the interior is difficult to access and its space limited. Such anodes are often mounted through the vessel shell, with the anode part of the probe extending into the vessel, and wire connections made to the probe on the exterior of the vessel.

 Tiaano offer Platinised Titanium and Niobium cantilever (probe) anodes for this application (medium seawater, fresh water and brackish water) Also Tiaano offer platinized Rods and Tubes suitable for cantilevers (probes).

The primary use of platinized titanium anodes is in the field of Cathodic Protection. The anodes are used in structures buried in soil and the steel exposed to marine environments such as oil and gas producing platforms, ships, oil well casings and jetties.

Platinized Titanium Anodes synergistically combine the favourable electrochemical features of platinum (Pt) with the corrosion resistance and other characteristics of titanium. They are anodes normally produced by the electrochemical deposition of a very thin layer of platinum metal onto a titanium substrate. These anodes operate as inert anodes with high durability and are preferred because they remain insoluble in common electrolytes.

FOR ENQUIRES PLEASE DROP YOUR EMAIL AT dsa@tiaano.com/dsasupport@tiaano.com

PLATINIZED_ROD



PLATINISED / MMO COATED / NICKLE ROD

clock July 30, 2022 15:13 by author admin

We, Ti anode fabricators Pvt. Ltd., is familiar in manufacturing and supplying of MMO & Platinum plated Titanium and Niobium anodes for Impressed Current Cathodic Protection (ICCP).

Platinized Nickel Rod anodes are planned with explicit platinum material (Pt.) which makes the anodes correspondingly stable for a long time. Tiaano designs and production platinised Nickel Rod anodes with various aspects and plating thicknesses. Tiaano have the factory to do platinum plating 0.5 micron to 20 micron thick by the course of Electro affidavit.

Nickel is slow to oxidise at room temperature and hence it is considered to be naturally corrosion resistant. High-performance nickel alloys are also resistant to reducing media, aggressive chemicals and seawater. Corrosion-resistance properties vary depending on the Grade chosen for your pipes.

Long life, correspondingly steady and effortlessly created into any shape: When utilized in the plating system, aspect of the lead anodes are changing because of the deficiency of the lead oxide which is framed on the anode during activity - it leads surface region is getting imploded. Likewise bigger lead anodes can extend under their own weight. While titanium anodes are correspondingly steady all through their working life and can without much of a stretch be fabricated, even in complex shapes and lengths, up to 4m. Thusly, formed anodes can be fabricated precisely to permit steady plating to little resilience’s, frequently making a further sharpening step pointless.

Energy reserve funds with moulded anodes and little anode/cathode distances: Small terminal holes lessen electrical obstruction misfortunes in the plating shower and produce energy investment funds. On account of lead anodes, which can't be framed as precisely as a lattice, opposition misfortunes bring about shower warming, requiring further energy for cooling. In this manner, platinised titanium anodes can give energy reserve funds both in warming and cooling which, thusly, permits the plating science to be more straightforward to oversee and keep up with.

FOR ENQUIRES PLEASE DROP YOUR EMAIL AT dsa@tiaano.com/dsasupport@tiaano.com

PLATINISED/MMO_COATED/NICKLE_ ROD



PLATINISED COPPER CORED TITANIUM ROD

clock July 27, 2022 17:29 by author admin

 

PLATINISED COPPER CORED TITANIUM ROD

Platinized titanium anodes are extensively used in electrolytic processes. They have successfully replaced lead anodes in electroplating applications due to their lower consumption, dimensional accuracy, ability to form precise deposit thicknesses on desired geometric shapes, predictable plating chemistry and ease of maintenance. These anodes can be designed and formed with various geometries based upon the parts to be electroplated.

Platinum on titanium anodes are highly preferred anodes for electrodeposition of copper, chromium, platinum, nickel, palladium and gold.

Platinized titanium anode by adopting thermal decomposition process to get a dense wear-resistant layer of platinum coating. The anode surface is modified to improve adhesion of platinum and to significantly improve uniformity of coating thickness, also reduce the coating porosity imparting greater acid resistance to the anode. This platinum coated titanium anode can be fabricated into bar, rod, sheet, mesh and other customized shape to meet your special needs.

Because of its high conductivity and low consumption rate, Platinum is an excellent anode material. Due to its high cost, Platinum is made practical for use by electroplating a thin layer over a high corrosion resistance substrate. Since Titanium, Niobium and Tantalum substrates have the ability to form an insulating oxide film under anodic conditions, they are commonly used as anode in ICCP (impressed current cathodic protection anode). Among them, Titanium is less expensive; however, it has a much lower breakdown potential than Niobium or Tantalum. The titanium oxide breaks down at anodic potentials in the 12 V range.

Advantages of platinized titanium anodes

Low consumption rate and high current density

Voltages in excess of 10 Volts will result in severe pitting of the titanium core causing premature failure

 

platinised_copper_cored_titanium_rod

For Enquiries please drop your email at dsa@tiaano.com|dsasupport@tiaano.com



Manufacturing and Supply of Platinum Plated Cantilever

clock April 29, 2022 14:44 by author admin

Cathodic protection (CP) is a technique used to control the corrosion of a metal surface by passing positive connection in the anodes side and negative connection in the cathodes side.

Platinized cantilever anode is used for protecting pipeline internals, suction and condenser box internal for 30 years and more by applying DC current from rectifier. Cantilever anode is coated with platinum or MMO (mixed metal oxide). The cathode will be protected and could be monitor by the reference electrodes.

Platinized titanium rods are usually used in cantilever anode. Normally titanium is well known for its high resistance to corrosion both water and chemical media but titanium is the poor electricity conductor. So we use platinum/ MMO plating/ Coating to increase the conductivity.

Advantages of Platinum coating:

•          Low consumption rate that conserves precious platinum.

•          Corrosion resistance ensures durability with easy maintainability.

•          Light weight, as well as favorable current distribution in electroplating.

•          Favorable dimensional stability.

  Recently supplied platinum plated cantilever for our Indonesia client

Cantilever anode

For more details visit these links:

www.cpanode.com,www.tiaanostore.in,www.tiaano.com

Follow us on:

Pinterest, Instagram, Facebook, Twitter



Platinized Titanium Rod Anode for Pipeline Protection

clock April 6, 2022 10:00 by author admin

Platinum is an excellent anode material due to its high conductivity and low consumption rate. Due to its high cost, Platinum is made practical for use by electroplating a thin layer over a high corrosion resistance substrate. Since Titanium, Niobium and Tantalum substrates are having the ability to form an insulating oxide film under anodic conditions, they are all most commonly used as anode in ICCP.

A platinized titanium anode is simply a titanium anode coated with platinum. These anodes act as an inert anodes and are non-consumable and long lasting. These anodes are insoluble in electrolyte where electrolysis is present. Platinized Titanium Rod are usually used in cantilever anode which is used for protecting pipeline internal, pump internal & condenser box internal for 30 years and more by applying DC current with transformer rectifier.

Applications:

  • Deep & conventional ground beds.
  • Jetties in fresh, brackish and salt-water electrolytes.
  • Water tanks.
  • Lock Gates.
  • Intake Screens.
  • Marine application

platinisedRod

For more details visit these links:

www.cpanode.com,www.tiaanostore.in,www.tiaano.com

Follow us on:

Pinterest, Instagram, Facebook, Twitter



Manufacturing and Supply of Platinized Titanium Rod Anode for Cathodic Protection

clock January 12, 2022 09:14 by author admin

What is Cathodic Protection?

Cathodic protection system is to protect a wide range of metallic structures in various environments. Common applications or environment to protect steel, water or fuel pipelines and steel storage tanks such as huge oil tanks, chemical storage tanks, steel pier piles, ship and boat hulls, offshore oil platforms and onshore oil well casings and metal reinforcement bars in concrete buildings and structures. Corrosion can be defined as degradation of metal by forming electrical circuit where electrons get exchanged.

Ti Anode Fabricators Pvt. Ltd,Chennai, India is one of the best manufacturer in making MMO anodes or mixed metal oxide Cathodic Protection anodes and reference electrodes for a full range of cathodic protection application, by using Impressed Current Cathodic Protection (ICCP) process. The principle of cathodic protection is to connect an external anode to the metal and passing an electrical DC current so that all areas of the metal surface become cathodic and therefore do not corrode.

The external anode is to be an impressed current cathodic protection anode, where the current is impressed from an external DC power source. DC current is sent through an insulated wire to the anodes [which are either Dimensionally stable anodes / dimensionally stable anodes - MMO coated titanium anodes, Platinised titanium anodes, Platinized niobium anodes or their copper cored with platinum plated surface] buried in the soil like underground storage tank, pipeline, ship hulls etc.

Platinised Titanium Anode:

A platinized titanium anode is simply a titanium anode coated with platinum. These anodes act as an inert anodes and are non-consumable and long lasting. These anodes are insoluble in electrolyte where electrolysis is present. Platinized Titanium Rod are usually used in cantilever anode which is used for protecting pipeline internal, pump internal & condenser box internal for 30 years and more by applying DC current with transformer rectifier. 

Platinised CP Rod

Applications:

  • Deep & conventional ground beds.
  • Jetties in fresh, brackish and salt-water electrolytes.
  • Water tanks.
  • Lock Gates.
  • Intake Screens.
  • Marine application.

Tiaano’s different types of anodes for Cathodic Protection:

Platinum plating and MMO coating have long life in all environments and services and also withstand in natural waters. Tiaano design and manufacture various types of anodes such as:

  • Strip/Disc Anode
  • Ribbon mesh anode
  • Tubular String Anode
  • Canister/Cantilever anodes
  • Piggy back anodes
  • Cables etc.

We also supply anodes for electroplating, electrolysis, water treatment deionization and various applications.

For more details visit these links:

www.cpanode.com,www.tiaanostore.in,www.tiaano.com

Follow us on:

Pinterest, Instagram, Facebook, Twitter



PLATINIZED TITANUM ROD ANODE FOR CATHODIC PROTECTION – TIANNO MANUFACTURER AND SUPPLIER OF MMO COATED/PLATINIZED TITANIUM AND NIOBIUM ANODES

clock May 10, 2021 16:35 by author admin

Platinized rod used in cantiliver anodes with active part of plating to protect the gigantic pump internals, suction, condenser box and pipelines etc.,

Platinum is an excellent catalyst due to its high conductivity and low consumption rate. Platinum deposition made by electroplating method over a high corrosion resistance substrate (Titanium). Since Titanium substrates is having non-corrosive nature form by insulating oxide film by platinum plantings.

Platinized titanium rod are usually used in cantilever anode which is used for protecting pipeline internals, suction and condenser box internal for 30 years and more by applying DC current with transformer rectifier. Normally titanium is well known for its high resistance to corrosion both water and chemical media but titanium is the poor electricity conductor. So we use platinum/ MMO plating/ Coating to increase the conductivity.

 Advantages:

  • Ø  Low consumption rate that conserves precious platinum.
  • Ø  Favorable dimensional stability.
  • Ø  Corrosion resistance ensures durability with easy maintainability of the cathode to be protects.
  • Ø  Light weight, as well as favorable current distribution in electroplating.

 

Tianno (Ti Anode Fabricators Pvt Ltd, Chennai, India) manufacturing and supplying platinized anodes and cathodic production based on titanium, niobium and other exotic metals. We produce a wide variety of standard and customized anode shapes to maximize your benefit. Below product is recently supplied to Saudi Arabia.  

                         



Platinised rod for cathodic protection

clock March 20, 2021 13:37 by author admin

Platinised rod is used for cantiliver anodes with active part of platinum plating to protect the gigantic pump internals and pipe lines.

Tianno manufacturing FRP insulated platinised rod and MMO coated rod for the cathodic protection of these structures. Below photo image of recently supplied to USA.



TextBox

Tag cloud

Sign In